- The first and most important step is to remove the battery from your laptop.
- Now you must remove your casing; you need to be very careful while doing it.
- The most important thing that you need to have while doing this process is to have patience.
Hard Disks are the brain of your laptop as they store all your data including your documents, photos, videos, browsing history, etc. Thereby, you need to have enough space to store your data whether you are a writer, software engineer, or a photographer. It is crucial to have a hard disk whose storage capacity meets your data requirements.
In order to have the best-suited hard disk with appropriate specifications, it is suggested to make a purchase from a trustworthy seller. There are many reliable providers of hard disks like shopcarmel.com and others; however, here we will guide you how to remove a hard disk from your laptop in 5 minutes or less.
Storage Range of Hard Disks
Firstly, you should be aware that hard disk’s storage capacity is measured in Bytes. The storage ranges from Megabytes (MBs), Gigabytes (GBs), and now Terabytes (TBs). The storage capacity in old laptops and PCs was less, and people often used to run out of data storage capacity.
Step-by-step Guide to Remove Hard Disk
If you run out of data storage capacity in your laptop, you don’t necessarily have to visit some expert for changing it. Since, hard disks are easily replaceable, and you can do it yourself too.
It is of utter importance that you make a backup of your valuable data when changing your hard drive. You can store your data in a portable hard disk or store it online. By following these steps you can easily remove your hard disk in five minutes:
Step 1: Remove Power Source of your Laptop
The first and most important step is to remove the battery from your laptop. You can remove your battery by turning your laptop upside-down. In most cases, the battery is easily detachable and can be removed by pulling the clip only. However, in some cases, the battery is inside the case, for which you’ll have to remove the case by opening the screws.
For opening the screws, you must have a jeweler’s screwdriver, as it can fit almost all screws in the laptop. The laptop screws are very small; they need very specific screwdrivers that can easily open them. Also, remove the charging cable from your laptop as it can electrocute you. You can find out the best products to avoid electrocution at shopcarmel.com.
Step 2: Remove the Casing by Removing Screws
Now you must remove your casing; you need to be very careful while doing it. Unscrewing your laptop screws requires you to be a little delicate, and you can do it with ultimate care. Applying force can ruin your screw grip, and that will cost you a lot to get repaired.
Now you need to identify where your Hard Drive is located; most of the laptops have large segments on the backside, making it easy to open, while some have their hard disks behind their keyboard.
Thereby, you need to unscrew more screws and carefully remove the keyboard as it is very delicate, and mishandling can break it. Most of the laptops come with an instruction manual that can guide you about the hard drive’s position.
Step 3: Remove the Drive from the Mount
The most important thing that you need to have while doing this process is to have patience. You might have to open screws that you haven’t before. When you find the disk’s position, you will find it attached to a mount. There can be two to four screws (the number of screws varies with every laptop) that you need to unscrew first.
While removing these screws, you should be careful as these screws are very small and can get misplaced. Please keep them all in one place in a safe holder. These screws are essential as they prevent your Hard Disk from getting damaged and holds it in one place.
Some new laptops now have a lever and have gone tool-less. That makes it very easy to remove and unhook the mount’s drive and not require much effort.
Step 4: Take out the Hard Drive from the Connector
This step is the last step of removing the Hard Drive from the laptop. You need to pull out your hard drive from the connector chip by pulling it downwards first. If you remove your Hard Drive directly, it can damage the chip and connector, and no new drive can be supported without it.
There is a possibility that your Hard Drive can have a casing that needs to be removed to install some other Hard Drive on your laptop. That casing can be removed by opening the screws attached to its sides.
In the end, it is easy to remove a hard disk from your laptop. This process is simple and can be done in five minutes. It would help if you kept these things in consideration when doing the process.
- Prepare a backup for your data before starting the process.
- You must have a Jewelers Screwdriver to open screws.
- Keep the screws safe as they are delicate and hard to find.
- Do not apply force in any case; laptops are delicate and don’t require force.